Tank Hydro

Under federal law, most SCUBA tanks must undergo hydrostatic testing every five years. Please note that additional fees may apply if the tank valve needs cleaning or rebuilding.

  • Air Hydro, VIP, and Fill —– $60
  • Nitrox Hydro, VIP, and Fill —– $67 (Up to 40%)
  • O2 Hydro, VIP, and Fill —– $60 + cost of gas

Valve Rebuild 

Tank valves are often overlooked when it comes to maintenance. At Extreme Sports, we offer a complete valve rebuild and deep cleaning for $25 plus the cost of a fill. If any parts need to be replaced, additional charges may apply. For manifold systems, the rebuild and cleaning service is $40 plus fill.

  • Valve Rebuild / Clean —– $25 + cost of gas
  • Manifold Rebuild / Clean —– $40 + cost of gas

O2 Cylinder Cleaning 

If your cylinder needs to be “O2 cleaned,” it will require at minimum a clean-out wash and most likely a valve rebuild and cleaning. Because Extreme Sports uses partial pressure blending for Nitrox fills, all cylinders must be O2-ready.

  • Nitrox / Oxygen Cylinder Deep Clean —– $60 + cost of gas
  • Valve Rebuild / Deep Clean —– $40 + cost of gas

OTS Full Face Mask 

Ocean Technology Systems recommends an annual service on their masks. Pricing includes parts and labor.

  • Guardian FFM full rebuild – $225

Scubapro Regulator Service 

Scubapro regulators are available in a wide range of models, and Extreme Sports is equipped to service nearly any model ever made. Labor is priced at $30 per stage, plus the cost of the appropriate service kit.

  • Labor Per Stage —– $30
  • Parts Kits Per Stage —– $20-$60

Other Brand Regulator Service 

There are nearly a hundred regulator brands available in a wide range of models, and Extreme Sports is has a partnership with a service center in Texas to service most brands. Lead times are roughly 4-8 weeks.

  • Labor Per Stage —– $40
  • Parts Kits Per Stage —– $30-$80

Cylinder Fills

Tank fills are done in house. All cylinders must be current on hydrostatic test date and visual inspection date.

  • Air Fill (3000psi) —– $10
  • Air Fill (3500psi) —– $12
  • Air Fill (Over 3500psi) —– $15
  • Nitrox Fill up to 40% (3000psi) —– $10
  • Nitrox Fill up to 40% (3500psi) —– $12
  • O2 Fill —– $1 per cubic ft

Visual Inspections 

Visual Inspections are done in house and are priced including a fill. All cylinders must be current on hydrostatic test date.

  • Air VIP —– $20
  • Nitrox VIP up to 40% —– $40
  • O2 VIP  —– $20 + $1 per cubic ft

Doubles 

  • Manifold Break Down and Rebuild —– $50 per set + cost of gas
  • Doubles Breakdown and Reassembly —– $25 per set + cost of gas
  • Doubles VIP —– $65 + cost of gas